04ECE 198 Project Studio · Fall 2026

RLC Band-Pass Filter

I breadboarded a series RLC band-pass filter and measured its frequency and phase response on an oscilloscope to locate resonance.

Illustration

Band-pass response. Gain rises to a peak at resonance and falls away on both sides. Phase leads below resonance, is zero at resonance, and lags above it.resonancegainphasein phasefrequency (log scale) →
The general shape of a series RLC band-pass response with the output taken across the resistor, as in my circuit, drawn from the textbook formula. It is not my measured data: this page shows no measured values.

What I did

I breadboarded a series RLC band-pass filter, with the output taken across the resistor, and measured the component values with an LCR meter.

I measured the frequency and phase response with an oscilloscope and a function generator, and plotted the results to locate resonance.

I observed the filter attenuating square-wave harmonics and noise.

Tools

  • Breadboard
  • LCR meter, oscilloscope, function generator